21
Carefully replace the reinforced slat
back onto the slat attachment hook by
reversing the steps to remove the slat
[Fig. 5.6]. Be sure the slat is oriented
the same as the other slats within the
assembly.
Figure 5.6; Reattach Vertical Slat
You have now completed installing your E-Wand onto your vertical
blinds.
4. Replace First Slat
Figure 5.5; Proper Positioning
Release the blind mount to allow the
bellows to extend upwards toward the
header, covering the attachment hook.
Be sure the slat attachment can move
through the open slot in the blind mount
[Fig. 5.5].
3. Attach the E-Wand to the Vertical Blind
Pull down on the VERTICAL BLIND
MOUNT’S bellows to expose the E-Wand
ATTACHMENT HOOK. Hook the E-Wand
ATTACHMENT HOOK onto the existing
blind’s tilt gear stem [Fig. 5.4].
Figure 5.4; Hook on E-Wand
