29
Figure 7.6; Press and release the
programming button quickly three times
On any E-Wand you wish to pair to the
bridge (you can add more than one
device at a time), press and release the
programming button 3 times (without
hearing a beep) [Fig. 7.6]. The E-Wand
will start beeping to indicate it is
searching for a network.
You will see the device pop up in the
menu on your Smart Phone screen.
Select the appropriate device, using the
“identify” button if needed [Fig. 7.7].
Once the device has been identified, hit
“register”, then name the device.
If you would like to add any additional
devices, repeat step 4.
Once your devices have been added,
follow the prompts in the app to set up
groups, scenes, and schedules as desired.
E-Wand
Figure 7.7; Device will show up, hit
Register
4. Pair and Add Devices
In the app under devices, hit the + sign
[Fig. 7.5].
Figure 7.5; Hit the + to add a device
Beach House
