11
8. CONNECT POWER
8.1
- On Alkaline battery powered units
, untwist the Pendant Cap
and insert (6) or (8) D Cell Alkaline batteries, negative end first.
Then replace cap. Twist the Pendant onto the Pendant Lock until
you feel it lock into place. See Figure 2.8.1.
Figure 2.8.1 - Insert Batteries into the Pendant
8.3 -
On 9V and 12V low voltage wall plug units
, twist the Pendant
lock to secure onto the unit. See Figure 2.8.3.1.
8.2 -
On Lithium Ion rechargeable battery powered units
, twist
the Pendant lock to secure onto the unit. See Figure 2.8.2.1.
Figure 2.8.2.2 - Plug input into bottom of Pendant and plug into wall
outlet
Figure 2.8.3.1 - Screw the Pendant onto the Cord
Figure 2.8.2.1 - Screw the Pendant onto the Cord
To charge, plug the charger power input into the jack in the bottom
of the Pendant and plug the wall port into an outlet. The Pendant
does not need to be connected to the drapery to charge. See Figure
2.8.2.2.
Figure 2.8.3.2 - Plug input into bottom of Pendant and plug into wall
outlet
Power up by plugging the power input into the jack at the bottom
of the Pendant, and plugging the wall port into the desired outlet.
See Figure 2.8.3.2.
