6
Fit the stain bottle
With the lid removed, push fit the stain bottle into the bottle
holder, it will ‘click’ into position when fitted correctly.
Note: To fit correctly, the ‘prongs’ on the bottle cap MUST be
lined up as shown.
Shake the bottle for at least
10 seconds before removing
the lid.
Do not attempt to
remove the bottle cap.
Keep the lid to reseal the
bottle after use.
a
THE STAIN BOTTLE
SETTING UP THE
POWERPAD
SETTING UP THE
POWERPAD
Adjusting the angle of the
PowerPad
Turn the hinge lock
anticlockwise to unlock the
pivoting hinge.
Adjust the stem angle to the
required position.
b
c
Once the angle is set, turn the
hinge lock clockwise to lock
the pivoting hinge in position.
d
Turn to
lock
Prongs
Lid
Cap
Turn to
unlock
