5
ASSEMBLE THE STEM
IMPORTANT: Take care when handling the wired stem sections.
Do not pull or strain the wires or damage could be caused.
Insert stem 3 into stem 4 (connected to the
PowerPad), it will ‘click’ into position when fitted
correctly. Repeat with Stem 2 and stem 1.
IMPORTANT: Do not try to separate the stem sections once fitted.
1. Press down on the catch to unclip the battery cover.
2. Completely remove the battery cover from the main casing.
3. Insert 4 x AA batteries into the battery casing as shown above.
Refit the battery cover, positioning the lower lugs into the holes on the main casing and push
back into position. It will ‘click’ into position when fitted correctly.
FIT THE BATTERIES
1
3
2
Lugs
Stem 3
Stem 4
Stem 2
Stem 1
