SECTION 1 JETSORT 1000 Series SET-UP
PROGRAMMING AND STORING JETSORT FEATURES
JetSort is designed to provide you with a high level of user-programmable features to
make your coin counting and sorting tasks as easy and automated as possible. This
section addresses these features and explains how to set up JetSort features to your
specific coin sorting and counting requirements.
The JetSort is designed to provide a wide range of programmable features to meet your
specific needs. The performance of your JetSort will depend upon which features are
incorporated into the specific machine you are operating. Standard pre-programmed
features built into the JetSort may also affect its operation and the appearance of certain
screens.
Some operations and displays described here may not be consistent with those shown
on your machine. Your JetSort operation may vary depending on how it is configured
and which features are enabled or disabled.
IMPORTANT INFORMATION
Please read the following information before entering Set-Up.
To move within the Set-Up mode, use the following keys:
BATCH KEY: Moves
backward
SUB-BAT:
Moves forward
PRINT:
Moves cursor from top line to bottom line
TOTALS OR DENOM:
Allows operator to select an option. TOTALS
key
moves
forward,
DENOM key moves
backward.
CLEAR:
This key is also used to exit the Set-Up Mode.
Rev. D
Page 10
Form # 022-7240-00
