SECTION 2 JETSORT 1000 Series OPERATION
OPERATING THE JETSORT 1000:
certain that there is Box or Bag in place for
.
STARTING BATCHES & SUB-BATCHES:
o begin sorting coin, press the BATCH key. Feed coin from the inspection tray into the
.
ENTERING AND CORRECTING LABELS INFORMATION
t this
in the middle of a Batch, the operator needs to correct a label, press the LABELS key
ress
.
ENTERING AND CORRECTING ID INFORMATION
he ID function needs to be turned On in Set-Up. Enter ID information through the
n,
g
in the middle of a Batch, the operator needs to correct an ID, press the ID key when
ting.
efore turning on the power, check to make
B
each denomination to be counted. Turn on the main power switch located at the back of
the machine.
1
T
sorting chamber. A new Batch or Sub-Batch is begun by ending the current transaction
(END key if selected as “needed” in set up), and pressing the BATCH or SUB-BATCH
keys to begin a new transaction. Upon ending a Batch, data is transferred to the Day
Total and the Batch Register is cleared.
2
ab
L
els A-D need to be turned On if labels are to be used. Enter label information
through the numeric keypad and press the ENTER key to accept the entry. Repea
process to enter information for additional label prompts. Label information is not stored
in long term memory.
If
when the screen says Batch Waiting. The screen will indicate the label previously
entered. At this point, the operator can input the correct label via the keypad and P
ENTER to accept the entry. When the screen says Batch Waiting, the operator can
resume sorting. Data can only be corrected while in a Batch Waiting condition.
3
T
numeric keypad and press ENTER to accept the entry. If the ID function is turned O
you cannot bypass the ID prompt without entering an ID. ID information is stored in lon
term memory.
If
the screen says Batch Waiting. The screen will indicate the ID previously entered. At
this point, the operator can input the correct ID via the keypad and Press ENTER to
accept the entry. When the screen says Batch Waiting, the operator can resume sor
Data can only be corrected while in a Batch Waiting condition.
Rev. D
Page 26
Form # 022-7240-00
