SECTION 1 JETSORT 1000 Series SET-UP
Æ
Custom Labels:
(A) (B) (C)
12.
Allows for tracking and reporting of JetSort information by four (4) operator specified
categories A, B, C, and D. Label headers (i.e. Route, Bag, Customer, Operator, Teller,
etc.) may be customized with names up to twelve characters (alpha and numeric) each.
Label A: Batch label. Appears in Batch print reports only.
Label B: Batch label. Appears in Batch and Sub-Batch print reports.
Label C: Sub-Batch label. Appears in Sub-Batch print reports only.
Label D: Sub-Batch label. Appears in Sub-Batch print reports only.
Æ
D:
Date
Off
Off
13.
Allows the operator to track monies by date. Normally entered on the numeric keypad as
(MM-DD-YY) followed by ENTER. If turned on, the Date field cannot be bypassed
without entering data. Factory Default is “Off.”
14.
Æ
Custom Labels:
(D) (ID)
Allows a custom ID label to be entered.
Æ
ID Codes:
(Off)
15.
Entry field used to track information separated into individual segments (products,
operators, etc.). Batches and Sub-Batches are run within this field. Batches and Sub-
Batches can be cleared while their totals remain in memory under the ID code. Up to
100 fields can be accessed using numbers 1-100. If ID Codes are turned On, a prompt
to enter an ID code will appear when processing Batches and Sub-Batches and cannot
be bypassed. ID Codes can be set to Off or Automatic. Factory Default is “Off.”
Rev. D
Page 16
Form # 022-7240-00
