background image

 

SECTION 1       JETSORT 1000 Series SET-UP 

 
16.

 

Æ

BCR Setup: 

Scanr   (Off) 

 
 
 
JetSort can be connected to a Bar Code Wand or Scanner Gun.  To activate, select 
“Scanr” for Scanner Gun or “Wand” for Scanner Wand.  The Bar Code Reader option 
can be set to Off or Automatic.  If Auto is selected, when Label A is scanned, the JetSort 
will enter Label A and automatically move to Label B.  If Off is selected, when Label A is 
scanned, the operator must depress the ENTER key to move to Label B before 
scanning. 
 

Æ

Bilcnt    

Prnt: 

Off   All 

17.  

 
 
 
Allows a JetScan or JetCount to be connected to the JetSort 1000.  Billcount can be set 
to Off, Automatic, or Demand.  Under Print, the user can select Total or All.  “Total” will 
print the total amount of currency processed on the JetScan.  “All” prints all amounts by 
denomination of currency processed on the JetScan.  Factory Default is “All.”

 

 
18. 

Æ

End Key ? 

Not Needed 

 
 
 
If set to "Not Needed", pressing the SUB-BATCH key will end the current Sub-Batch and 
start the next one.  Press the END key to end the current Batch.  If set to "Needed", 
press the END key to end a Sub-Batch.  Press the END key a second time to end a 
batch.  Factory Default is set to “Not Needed.” 
 

Æ

End Bat Display 

              Total Amt. 

19. 

 
 
 
Upon ending a Batch or Sub-Batch, JetSort will display the total when set for “Total 
Amt.”.  If set to “Zero”, upon conclusion of a Batch or Sub-Batch, the display will show 
zero.  Factory Default is set to “Total Amt.” 
 

20. 

Æ

Clear at EndBat 

No

 

 
 
 
When set to “Yes”, and upon ending a Batch or Sub-Batch, all Boxes and/or Bags are 
automatically cleared.  The Factory Default is set to “No.”

 

Rev. D                        

Page 17 

Form # 022-7240-00

 

Summary of Contents for JetSort 1000 series














































Reviews: