Cumberland EDGE 074-11793, Wiring Diagram

Page: 10 / 82

Chapter 1: Introduction
Table 1-2 Modules for 3-Slot Expansion Box and 6-Slot Expansion Box (cont'd.)
EDGE 4IN-8REL PRO One 4 inputs, 8 relays and its plastic support
EDGE 2 VARIABLE OUTPUT KIT One kit to control two variables
EDGE 1 VARIABLE OUTPUT KIT One kit to control one variable
EDGE 4IN-12V One 4 inputs, 12 outputs for Variable Outputs or 0-10V devices and
its plastic support
EDGE 4IN-8REL FAILSAFE W/PLUGIN
RELAY PRO One 4 inputs, 8 relays with plug-in relays and its plastic support
EDGE 4IN-8REL FAILSAFE PRO One 4 inputs, 8 relays and its plastic support
Table 1-3 External Module
EDGE 4IN-2V-8DO One 4 inputs, 2 outputs for Variable Outputs or 0-10V devices, 8 dis-
crete outputs to control relays coils or contactors coils, 8 current
sensors inputs to read the relays or the contactors contacts at the
loads side, and its plastic support
Damage Inspection
Your system and its components were carefully inspected both electrically and mechanically before ship-
ment. After unpacking all items, check for any obvious signs of physical damage that may have occurred
during transit. Report any damage to the shipping agent immediately. Save the original box for possible
future shipment.
Returning the Unit for Repair
If you must return the system for repair, carefully package the system in its original box or an equivalent.
Contact your local customer service department to get return instructions. Have on hand the system’s
serial number and date code found on the system’s main board. See Contact Information/Support in this
manual.
System Overview
The EDGE system is a complete site management system for agricultural applications. Each system is
composed of a main unit and Expansion Boxes into which you can insert plug-in modules according to
your site needs.
EDGE Main Controller Consists of the unit with the touchscreen where all information is entered and
where the Expansion Box and equipment is configured
6-Slot Expansion Box Consists of inputs and outputs. This enclosure can contain up to 6 plug-in
modules
3-Slot Expansion Box Consists of inputs and outputs. This enclosure can contain up to 3 plug-in
modules
Table 1-4 Plug-in Modules Used in Expansion Boxes
EDGE 8IN-4V-6REL FAILSAFE WITH PLUGIN RELAY Eight sensor inputs (4-20mA, 0-5V, temperature, dry
contact), four 0-10V outputs , with a possibility of con-
trolling up to four variable output power modules
(SSR). This module can have up to six plug-in relays.
Two 24VDC outputs are available for power sensors.
EDGE 8IN-4V-6REL FAILSAFE Eight sensor inputs (4-20mA, 0-5V, temperature, dry
contact), four 0-10V outputs , with a possibility of
10 891–00516 EDGE Wiring Diagram