8887119
1/6 HP Portable Submersible Sump Pump
V1.0
6
For technical questions call 1-800-665-8685
13. Make sure that the device is switched off before unplugging it.
14. Disconnect the power supply before moving or transporting the device.
15. Do not install and switch on the pump if there are people or animals in
the medium, or have contact with the medium being pumped (such as
swimming pools).
WARNING! A qualified electrician should perform all wiring.
POWER CORD
1.
Do not operate this tool if the power cord is frayed or damaged as an
electric shock may occur, resulting in personal injury or property damage.
a.
Inspect the tool's power cord for cracks, fraying or other faults in
the insulation or plug before each use.
b. Discontinue use if a power cord feels more than comfortably
warm while operating the tool.
c.
Have the power cord replaced by a qualified service technician.
2. Keep all connections dry and off the ground to reduce the risk of
electric shock. Do not touch plug with wet hands.
3.
Prevent damage to the power cord by observing the following:
a.
Never use the cord to carry the tool.
b. Do not pull on the cord to disconnect the plug from an outlet.
c.
Keep the power cord clear of the tool and the tool's work path
while in operation. The cord should always stay behind the tool.
d. Keep cord away from heat, oil, sharp edges or moving parts.
4.
Do not allow people, mobile equipment or vehicles to pass over
unprotected power cords.
a.
Position power cords away from traffic areas.
b. Place cords in reinforced conduits.
c.
Place planks on either side of the power cord to create a
protective trench.
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace the
missing part before operating. Failure to do so could result in a malfunction
and personal injury.
Remove the parts and accessories from the packaging and inspect for damage.
