Cuisinart MP-150C, Instruction Manual

Page: 5 / 18

8 9
8. Place the splash guard on top of
the screen so the slot rests on top
of the ring nut and secures it into
place.
Option B: Assembling the desired screen attachment first
1. Place the main housing of the fruit & vegetable press on a flat and
sturdy surface where it will not be knocked over.
2. Place the drive coupling
assembly into the auger (NOTE:
It will not fit fully into the auger,
part of the spring will be visible).
3. Insert the auger and drive
coupling assembly into the
opening of the feed chute.
4. Attach the desired screen to the
threaded end of the feed chute
opening so that the tabs on the
large end are aligned with the
slots on the feed chute opening.
NOTE: They will not fit securely
together until the ring nut
has been properly secured
on. Screw the ring nut onto the
threaded end of the feed chute to
secure the screen in
place. Due to the spring, a little
pressure may be needed to
secure the ring nut into place.
To ensure that this step has been
done properly, check to see that the screen will not rotate. If it does
rotate, the tabs are not properly
aligned and the machine will not
operate properly. If this occurs,
simply unscrew the ring nut and
align the tabs.
5. Insert the feed chute into the
main housing. Secure it from
right to left until it clicks into
place and is upright.
6. Insert the hopper into the
top of the feed chute.
7. Attach the sauce funnel to the
screen by attaching the large
hook to the large side closest to
the main housing,
and the small hook to the other.
NOTE: The sauce funnel will be
resting on the countertop.
This allows you to use bowls
with varying heights. Sauce
funnel not suggested for use
with Potato / Pumpkin / Squash
Screen.
ON / MARCHE
OFF/ ARRÊT
REVERSE / MARCHE ARRIÈRE
Fig 1
Fig 2
ON / MARCHE
OFF/ ARRÊT
REVERSE / MARCHE ARRIÈRE
ON / MARCHE
OFF/ ARRÊT
REVERSE / MARCHE ARRIÈRE
ON / MARCHE
OFF/ ARRÊT
REVERSE / MARCHE ARRIÈRE
ON / MARCHE
OFF/ ARRÊT
REVERSE / MARCHE ARRIÈRE