9
8
Gold Tone Filters
1. Slide the grind chamber lid into grind outlet.
2. Place gold tone filter (
c
) into position under
the grind outlet and proceed with grinding.
NOTE:
For basket style filters you can pull
down the shelf and rest filter on top for
easy grinding.
Cuisinart
®
HomeBarista
™
Reusable Filter Cup
1. Flip shelf down.
2. Slide filter cup onto shelf (
d
), lining up
the top of the filter cup with the grinder spout,
and guiding the bottom into the shelf’s
grooved opening.
TIP:
Select either 1 or 2 cups on your grinder.
Selecting a larger number may cause the filter
cup to overflow. The recommended grind setting for auto drip
coffee makers is 7-12, depending on preference of coarseness.
NOTE:
When using a single-serve filter-cup
other than a Cuisinart HomeBarista
™
Reusable Filter Cup, you
may need to hold the filter cup under the grinder spout to fill.
CLEANING/MAINTENANCE
INSTRUCTIONS
NOTE:
If your unit stops grinding, the chute may be clogged. To
unclog, first unplug your grinder and then use the scoop
brush to clear out the chute of excess grounds.
HOPPER
1. Unplug unit.
2. Beans can be removed from the hopper by lifting off
the lid and rotating the knob to the "unlock" position. Once
unlocked, the hopper can be removed to pour out remaining
beans.
BURR GRINDER
1. After removing hopper, if some beans remain in the grinder,
put hopper back on, re-insert the grind container or filter and
run a grind cycle for 8 cups on any grind setting. Once fin-
ished, you can continue cleaning as instructed.
2. Rotate the grind selector dial counterclockwise until dial
stops. OFF will be indicated on LCD.
3. Unplug unit.
4. Remove the bean hopper lid and turn the
lock/unlock dial counterclockwise to release the
bean hopper.
NOTE:
You will notice the release arrow and
arrow on the burr on the inside of unit are now aligned. They
must be aligned in order to re-insert the hopper.
5. Once the bean hopper has been removed, remove
the burr grinder by grasping the metal handle and lifting up.
Use the brush to remove grinds or wash by hand. Replace
the burr grinder on the unit and rotate until the piece is fully
inserted. Push handle down, replace and lock hopper.
Note:
The hopper will not attach to the unit if the grinder has
not been fully inserted. The brush on the measuring scoop is
only for cleaning purposes.
6. Wipe body of grinder with a damp cloth.
NOTE:
The bean hopper, bean hopper lid, grind chamber, and grind
chamber lid can be washed by hand with hot, soapy water or
placed in the top shelf of a dishwasher. Dry thoroughly.
MAINTENANCE
Any other servicing or maintenance should be performed by an
authorized service representative.
WARNING: NEVER IMMERSE UNIT IN WATER.
c.
d.
