5
4
OPERATING INSTRUCTIONS
1. Remove bean hopper lid.
2. Fill bean hopper, making sure that the lid closes securely.
Maximum capacity is 16 oz (450 g); be sure you have enough
beans to grind your desired amount of coffee.
3. Plug cord into outlet.
4. Select grind setting – rotate the grind selector dial to choose
desired grind size. The higher the number, the coarser the
grind. Use 1–6 for espresso, 7–12 for auto drip, 13–18 for
French press. Your current selection will be displayed on the
LCD.
5. Select cup setting – press the CUPS button repeatedly until
your desired number of cups is displayed on the LCD, from 1 to
14 cups.
6. Place your preferred grounds container under grind outlet. (see
page 4 for different grounds collection recepticles).
NOTE:
Use care when grinding into filters as some grinds may
escape to your counter. To help alleviate - we suggest always
using the grind chamber lid as a guard (see photo page 7)
except when using the HomeBarista
™
or other single serve
reusable capsule. See specific filter use directions on pages
7-8.
7. Press the Start/Stop button to begin grinding. A safety interlock
system prevents the unit from operating unless the hopper is
properly in place.
NOTE:
If the grind chamber is overfilled, the chute can get
clogged and the unit will not work. The LCD will flash. To
unclog, first unplug your grinder and then use the scoop brush
to clear out the chute of excess grounds.
Also note:
If the grinder stops and displays EE in the LCD
screen at any point, the motor has likely overheated. Unplug
the grinder and wait for it to cool off (up to 30 minutes); when
the EE is no longer displayed, resume use.
8. Grinding will automatically stop upon completion.
NOTE:
To pause or cancel operation during use, see page 6.
9. Pull the grind chamber toward you or slide your preferred
grounds container out to remove from unit.
NOTICE
This appliance has a polarized plug (one blade is wider than the
other). To reduce the risk of electric shock, this plug will fit in a
polarized outlet only one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit, contact a qualified
electrician. Do not modify the plug in any way.
INTRODUCTION
The next generation of coffee grinders has arrived to deliver the new
standard in home-ground coffee! The conical burr grinds the beans
with precise uniformity while maintaining the full flavor of the coffee
bean. Whether you’re using a French press, auto drip or espresso
machine, you’ll always start with the best, most precise grind. This
grinder is fully automated – just choose your number of cups and
grind setting, push Start, and the LCD with countdown timer lets
you know how soon you’ll have your perfectly ground coffee!
GETTING STARTED
When you open your new grinder, you will notice it must be
assembled before use.
Take all the parts out of the box and remove plastic and packaging.
1. Place bean hopper on top of unit making sure
it aligns correctly.
2. Remove lid from bean hopper and locate the lock/unlock knob
and rotate clockwise into lock position and
replace lid.
3. Place grind chamber lid on grind chamber and insert into unit
(as pictured on page 3).
4. Insert scoop brush into holder on the base of the unit. Your unit
is now ready to be used.
GRIND DIRECTLY INTO:
• Grind chamber (included)
• Gold-tone filter (cone or basket style)
• Paper filter (cone or basket style)
• Portafilter
• Cuisinart
®
HomeBarista
™
Reusable Filter Cup or most single
serve reusable capsules
