Follow the cautions below when using these automatic juicer machines:
TAKE INTO ACCOUNT THE WORK ENVIRONMENT
Place the juicer on a firm, levelled surface.
Do not install the juicer in a humid or dusty location.
The juicer isn't thought to work in the bleakness or operating without light.
Do not expose the juicer to the rain.
Do not use the juicer near liquids or inflammable gases.
Maintain the order in your working zone; this will avoid possible accidents.
Pay attention when working with the machine and work with common sense.
DON'T SUBMERGE OR DEW THE MACHINE WITH WATER.
DON'T INTRODUCE ANIMALS INSIDE THE MACHINE.
MAINTAIN THE CHILDREN AT DISTANCE.
The machine should be manipulated by qualified and properly formed staff. The machine
must be managed by adults. Don't allow the children to use or play with it. Have special caution when the machine is working or when
the front cover is open, being the squeezer inside at sight.
TO AVOID CATCH DANGER BETWEEN THE BALLS AND THE PEELS EXTRACTOR, NEVER INTRODUCE YOUR HAND IN THE
INFERIOR PART OF THE LATERAL WHEN THE MACHINE IS WORKING.
MANIPULATE ALWAYS THE CUTTING BLADE WITH GLOVES TO AVOID A CUT.
PROTECT YOUSELF AGAINST ELECTRICAL SHOCKS.
Avoid the contact of the machine with electric conduction materials. The
machine has to be always with a non conductor protector isolation in contact with other materials.
THE REGULATION, CONSERVATION, REPAIR AND CLEANNING OPERATIONS OF THE MACHINE ARE CARRIED OUT WITH
THE MACHINE STOPPED AND DISCONNECTED FROM THE NET.
If you haven't been using the machine and before proceeding
to the maintenance or the substitution of a piece disconnect it from the net.
CONNECTION CABLE FOR EXTERNAL.
Only use marked confirmed and meetly jumper leads.
THE REPAIRS WILL ONLY BE CARRIED OUT BY AN SPECIALIST.
This electric machine has been manufactured executing the
rules that official organisms demand. The repairs can only be carried out by an specialist; otherwise accidents can happen.
CONTROL IF YOUR MACHINE HAS ANY DETERIORATION.
All the components should complete CE requirements and approvals to guarantee the perfect working of the machine.
Any deteriorated piece, switch or feeding cable will be changed or repaired by a post-sale service workshop, or by qualified
staff to avoid any danger.
USE ONLY THE ACCESSORIES AND THE ADAPTIVE UNITS MENTIONED IN THE BRIEFINGS, OR ANY THAT HAVE BEEN
RECOMMENDED BY THE MANUFACTURER OF THE MACHINE.
The use of other accessories, except those recommended in the briefings, in the catalogue, or recommended by the manufacturer
can be dangerous. All the security elements should be substituted only by other equivalents, homologated by the CE, and always be
in perfect state.
AVOID ANY CONTAMINATION POLLUTION RISK CARRYING OUT AT LEAST TWO DAILY CLEANINGS; CLEAN ALL THE PIECES
AND INSIDE PARTS EFFICIENTLY WITH NEUTER SOAP.
45
CAUTIONS
GB
CUISIMAT
