WARNING
38
Read all instructions carefully before using the machine and keep them for future references. The manufacturer declines all responsibilities
if the standards of the manual are not respected.
The present machine is an automatic juicer for citrus fruits.
This machine should be only used for the purpose for which it has been designed. Any other use is inappropriate and therefore
dangerous. The manufacturer will not be responsible for any damage caused by inappropriate use.
Before installing and using the machine read carefully this instruction manual.
The manufacturer will be able to introduce technical or aesthetic changes without previous notice.
INSTALLATION
Improper installation may damage the orange juicer machine. Please note the following during initial installation and whenever the
orange juicer is moved.
1.- UNPACKING
Place the box on a plane surface and with the arrow of the box always pointing out up.
Cut the external strips. Open the inferior part where it is leaning the machine and take out the cardboard container throwing
up.
+
+
INSPECT THE MACHINE FOR POSSIBLE DAMAGES DURING TRANSPORT OR UNDUE HANDLING. If it was necessary present
a reclamation before 24 hours to the transport company.
Retire the poli styrene pieces that are protecting the machine.
Once carried out these operations, proceed to check that all the elements of the machine are in the right position, according
to the Part name section.
+
+
2.- POSITIONING
To assure a good working, place the machine in a completely plane surface.
Level the machine out with the help of support feet.
Don't move the machine when it´s working.
3.- ELECTRICAL CONNECTION
AVOID ALL ACCIDENTAL GROUND STARTING. Before connecting the machine, verify that all the elements of the machine
are properly placed; otherwise it could cause a breakdown.
CHECK THAT VOLTAGE OF ELECTRIC NETWORK is the same as the one shown in the identification sheet of the machine.
THE CONNETION INSTALLATION should possess differential protection and own thermal magneto, also protected upstream.
DO NOT START THE MACHINE IF THE ELECTRIC CABLE OR PLUG ARE DAMAGED.
CONNECT THE PLUG to the electric network (230 V - 220 V - 110 V)
Note:
Make sure that the ground connection is propely done and according with the valid standards.
GB
GB
+
+
+
+
+
+
+
+
CUISIMAT
