•
Remove the SF393 cable
from the assembly.
•
Remove the DUC from the
cradle.
•
Remove the SF603 cable
from the assembly.
•
NOTE:
Leave all hose
clamps in their positions for
OZ-II cable routing.
•
Route the SF618 cable as
shown.
•
Plug the 8-pin end of the
cable into the 8-pin
receptacle on the
electronics box.
•
Plug the 4-pin end of the
cable into the RVC.
•
Place the OZ camera in the
cradle and plug the 5-pin
end of the SF618 cable into
the camera.
•
Tighten the cradle to hold
the camera in place.
27
SF973-INST
