•
Cut the red tubing to an
appropriate length for it be
plugged into the 90° PTC
fitting on the regulator.
•
Insert the end of the red
tubing into the PTC fitting
shown. Make sure the
tubing is properly mated.
•
Plug the LiDAR cable into
the 12-pin receptacle
shown.
•
Remove the dust cap from
the RVC and plug in the 4
pin end of the SF603 cable
into the camera. Retain
dust cap for when the
camera is not in use.
•
See note 4 on page 2.
•
Plug the 8-pin end of the
SF603 cable into the 8-pin
receptacle.
16
SF973-INST
