Cuckoo CRP-HU10 Tool Series, Operating Instructions Manual

Page: 23 / 60

To KeeP cooKeD rice WArM AnD TAsTY
23
w
w
w
.cu
ck
oo
w
orl
d.c
om
E
N
G
L
IS
H
❶
Press the TIME button fot 3 seconds in the waiting mode to enter
the Keep warm temperature setting mode. The display will show
as seen in the image. “74”current keep warm temperature will
show.
❶
Press the TIME button for 3 seconds in the waiting mode to go to
Keep warm temperature setting mode.
Press the TIME 1 times to enter the customized Keep Warm
setting mode.
❷
Press the MENU/SELECTION button so that the display shifts
0
→
1
→
2
→
-2
→
-1
❸
After setting the desired temperature, press PRESSURE COOK or
WARM/REHEAT button to automatically input the selected
temperature and enter the waiting mode (If you press Cancel or do
not operate fot 7 seconds, setting will be canceled and you will go
back to the waiting mode.) (When you press the TIME buttom,
you will enter the customized Keep Warm setting mode without
saving the changed value.)
❷
Press MENU/SELECTION button so that the display shifts
❸
Set the desired value and press PRESSURE COOK or
WARM/REHEAT button to automatically input the set value and
enter the waiting mode. (When you press the TIME button,
you will enter the customized taste setting mode without saving the
changed value.)
If the temperature in the rice cooker is not set properly, an odor or the color of the rice may change even
though it is cleaned frequently and boiled up. Temperature needs to be set.
Controlling method of warming temperature
Use it while opening the lid when there is too much water or rice becames too soft.
How to operate my mode function.
1. When you smell bad odors and the rice is too watery: The keep warm temperature is too low.
In this case, increase the “KEEP WARM” temperature by 1~2℃.
2. When the rice has a yellowish color or is too dry: The keep warm temperature is too high.
In this case decrease the “KEEP WARM” temperature by 1~2℃
1. If too much water is spilled out when you open the lid : press “MENU/SELECTION” button to raise the setting mode.
2. If the edge of rice is too soft : press “MENU/SELCETION” button to reduce the setting mode.
Device Temperature Control