Cuchen WHA-LX1000iDUS Series, User Manual

Page: 13 / 64

Operating Instructions
13
Cleaning the Pressure Nozzle
Pressure Cap/
Pressure Regulation Nozzle
Steam Vent
If water has collected
here, soak it up using a
dry kitchen towel.
Steam Cap
If the pressure regulation
nozzle’s packing is out
of place (as shown in the
diagram), steam will be
allowed to seep through.
Make sure the packing is
properly seated in place.
※ These parts become very hot. Do not touch immediately after cooking.
 Use the Auto Clean feature to clean debris and buildup from the steam vent. (See p.24.)
Cleaning the Steam Cap
※ The steam cap becomes very hot. Do not touch immediately after cooking.
You may get burned. Take extra caution.
1
Detach the steam
cap as shown in the
diagram.
2
Press down on the
clip on the front in
the direction of ①
and then spread
open by pushing
in the direction of
②
. Clean this part
regularly.
3
Hold the handle
of the steam cap
packing, and
detach the steam
cap. Then, clean it.
4
Insert the steam
cap packing to the
arrow direction.
5
To reassemble the
steam cap, align the
parts at the grooves
(
①
) and push down
in the direction
of the arrow until
the two parts are
securely attached.
6
To reinstall the
steam cap to the
cooker, seat the
steam cap on the lid
and press down on
①
until securely set
in place.
WHA-LX1000iD_ENG.indd 13 2017-06-21 �� 3:51:19