Cuchen WHA-LX1000iDUS Series, User Manual

Page: 11 / 64

11
Operating Instructions
Proper Assembly
Text shown right
side up
<Clean Cover – Front>
The texts should be shown properly, and the bumps of
the pressure packing and clean cover should be located
correctly.
<Clean Cover – Rear>
The texts are shown backward.
※
Do not insert screws or any other foreign object into
the hole.
※ Carefully examine the clean cover to determine which
side is the front and which is the back.
Caution: If the pressure packing/inner packing is not properly attached, it may cause steam escaping.
Detachment and Attachment of the Pressure Packing
1
Detachment of the Pressure Packing
Hold the outer part or the stainless steel and outer part of the clean cover
first and pull out the packing slowly to detach the packing.
(Clean the packing with the neutral kitchen detergent and sponge.)
2
Attachment of the Pressure Packing
Insert the packing into the groove of the clean cover. Turn the clean cover
while pressing the inner and outer parts of the packing with both of your
thumbs, and press the packing.
- If the packing is not firmly attached to the clean cover, steam will escape
and cooking and keeping rice warm will be disabled. (Before attaching the
pressure packing, the bumps of the packing must fit into the those of the
clean cover.) (See p.10.)
3
Verification of Pressure Packing Attachment
Place the clean cover in a clean place. Then, turn the inner and outer parts of the pressure packing
with your thumb or index finger to firmly insert the packing into the groove of the clean cover. (Check if
the packing is round.)
Proper Attachment Improper Attachment
※ The packing should maintain the round shape
of the clean cover.
※ If the clean cover is in an oval shape, it will mean
that the pressure packing is not properly attached.
(For easy attachment, attach the pressure packing
right after cleaning.)
WHA-LX1000iD_ENG.indd 11 2017-06-21 �� 3:51:17