Cub Cadet RT-75, Shop Manual

Page: 51 / 54

Swivel Handle
47
5. Remove the Belleville washer. See Figure 8.10.
6. Remove the nut and bolt that the swivel latch and
spring pivot on, using a pair of 9/16” wrenches. See
Figure 8.11.
7. Remove the swivel latch and spring.
8. Lift the upper swivel latch bracket off of the machine.
9. If the lower bracket is damaged or worn, remove and
replace it by removing the four nuts and bolts that
hold it down, using a pair of 1/2” wrenches. See Fig-
ure 8.12.
To reassemble the swivel bracket assembly:
10. If removed, install the lower bracket assembly.
11. Apply a generous coating of anti-seize compound to
the lower bracket assembly where the upper and
lower brackets make contact.
Figure 8.10
Belleville washer
Figure 8.11
swivel latch
upper swivel bracket
Figure 8.12
anti-seize