Cub Cadet 7360SS, Service Manual

Page: 148 / 170

147
(2) STEERING WHEEL REASSEMBLING
*Reassemble steering wheel with reverse
procedure of removal. Use following values
as adjustment and service standard.
1. Apply grease to spline of the shaft.
2. Adjust the end play at shaft to be less than
[0.0197 in.] by liner.
3. Tightening torque of steering wheel fixing nut
[28.93~32.55 lbf •ft ]
9-5 STEERING UNIT REASSEMBLING
*Reassemble steering unit with reverse
procedure of disassembling.
(1) STEERING UNIT REASSEMBLING
(1)DUST SEAL
(2)RETAINING NUT
(3)SEAL GRAND BUSHING
(4)O-RING
(5)OIL SEAL (X-RING)
(6)NEEDLE BEARING KIT
(7)RELEASE BEARING
(8)THRUST NEEDLE
(9)RELIEF VALVE ADJUSTER
(10)O-RING
(11)COLER
(12)SPRING
(13)POPPET
(14)CONTROL PARTS ASSY
(15)HOUSING
(16)CONTROL SLEEVE
(17)CONTROL SLEEVE
(18)FLATE SPRING
(19)CENTERING SPRING
(20)PIN
(21)O-RING
(22)SPACER
(23)DRIVE
(24)ROTA SET
(25)O-RING
(26)SPACER
(27)END CAP
(28)RETAINER SCREW
(29)CHECK VALVE RETAINER SCREW
(30)BALL