Cub Cadet 7360SS, Service Manual

Page: 112 / 170

111
2) Remove snap ring(2) from main shaft and
remove gear 22T and bearing(3).
3) Remove snap ring(4) and remove drive
shaft A.
2. Disassemble counter shaft
1) Remove snap ring(1) and remove gear 30T
from counter shaft.
2) Remove counter shaft from cover A.
3) Remove gear 31T with needle bearing and
washers.
4) Remove snap ring (2),(3) and remove gear
27T from counter shaft.
3. Remove drive shaft.
6. TRANSMISSION
6-1. CLUTCH HOUSING DISASSEMBLING
(1) COVER B SUB ASSY REMOVAL
1. Remove the fixing bolt of cover B and
remove cover B sub assy.
(2) COVER B SUB ASSY DISASSEMBLING
1. Disassemble main shaft
1) Remove snap ring (1)and remove main
shaft from cover B.
cover B