38
s
ectiOn
7— s
ervice
Changing the Spindle Assembly
Jack up the front of the mowing deck about one foot and
1.
block it in that position.
Make sure the blade clutch is disengaged.
2.
Remove the deck cover.
3.
Remove the drive belts. (See Replacing the Deck belt.)
4.
Remove the blade. (See Replacing the Blades)
5.
Using a wrench or socket ratchet remove flange lock
6.
nuts, and the four hex flange bolts. Remove the spindle
assembly. See Fig. 7-6.
Reverse the process to install the spindle assembly.
7.
Tractor Creeping
Creeping is the slight forward or backward movement of the
mower when the throttle is on and the speed control pedals are
in the neutral position. If your mower creeps, see an authorized
service dealer.
Spindle Assembly
Blade
Flange Lock Nut
Spacer
Hex Flange Bolt
Support Plate
Flange Lock Nut
Hex Screw
Figure 7-5
Summary of Contents for S6031 Tank S
Page 45: ...Notes 12 45...
