CTP Systems CTPhone 1900, Applications Manual

Page: 59 / 132

DOC00101-01 3-11
CTPhone 1900 System Hardware & Software Installation
Fifth Antenna Installation
A professional installer, trained and endorsed by the Manufacturer, must
install the fifth antenna using an SMA connector and RG 58 cable. Use no
more than 100 feet (30 meters) of cable for best performance [this should
cover a 20 x 20 foot (6 x 6 meter) space]. If you need to replace the fifth
antenna, it must be professionally installed using a replacement of the
same type with a gain not to exceed 3dBi, including the cable.
Outdoor Base Station Installation
TEXT TO BE ADDED.
Replacing a Base Station
Adding a Second Base Station
Specific CTPhone software is required for systems with two base stations.
When adding a second base station to a system, you may also need to
perform a software upgrade.
+
Replacing a Base Station
Step Procedure
1 Disconnect transmit and receive cables of the base station
you want to replace. Then lift the base station off the mount-
ing screws.
2 Mount the new base station and connect the transmit and
receive cables.
3 If the base station does not come on-line within a minute,
perform a software upgrade using the latest version of soft-
ware you have. See Upgrading Base Station or CTPhone
1900 System Software on page 3-26.
+
Adding a Second Base Station
Step Procedure
1 Determine the location of the second base station.
2 Complete the necessary cabling for the base station. See
CTPhone 1900 System Cabling on page 3-4.
3 Install the base station. See Base Station Installation on
page 3-8.