CTP Systems CTPhone 1900, Applications Manual

Page: 77 / 132

DOC00101-01 4-3
CTPhone 1900 System Configuration
Configuration Check List
Following is a list of things you must do to configure a CTPhone 1900 sys-
tem. This check list is also in the CTPhone Manager on-line help.
Important Note The PC communication port connected to the CTPhone
Controller is stored on the CTPhone Controller. This allows you to commu-
nicate with the CTPhone Controller. Because this information is important,
information for setting communication port is described below, although it
is also explained in the on-line help.
Setting COM Ports
If you start CTPhone Manager and receive a warning message that says
CTPhone Manager cannot open Port 1 or 2, it means that communication
port configuration does not match hardware configuration. You can use the
following instructions to change the software configuration.
1 In the Wireless Manager tool bar, click .
2 In the Configure menu bar, choose Port Setting from the Preferences
menu.
The Port Settings Dialog box appears.
3 Click Comm Port 1 or 2 to tell CTPhone Manager what port to use for
transferring data to and from the PC.
4 Click Close to close the dialog box.
Check COM ports
Set system date and time
Configure system parameters
Configure CTPhone extensions
Configure CTPhone handset features
Save a copy of your configuration