CTP Systems CTPhone 1900, Applications Manual

Page: 68 / 132

3-20 DOC00101-01
CTPhone 1900 System Hardware & Software Installation
Software Installation Process
The general steps to completing software installation are listed below.
Each step is described in the sections following.
Note During a first-time software installation process on systems require-
ing UTAM activation, the upgrade procedure has to be performed in two
steps. Once a system is UTAM-activated, software upgrades load the soft-
ware on the Controller and base stations in one step.
CTPhone Manager in Multiple System Environments
If you use a single PC to maintain two systems, beware that the CTPhone
Manager only reports general alarms when it is connected to a CTPhone
Controller. The CTPhone Controller does store up to 12 critical alarms in a
rolling buffer.
1 Install CTPhone Manager.
2 Copy CTPhone Manager system software provided on diskette
onto the personal computer.
3 Start the CTPhone Manager.
4 Perform a software upgrade using the CTPhone Manager in order
to upload the application software to the CTPhone Controller.
5 For systems requiring UTAM activation, perform activation.
6 Configure basic system settings.
7 Perform a software upgrade again to complete loading of software
onto the base stations.