Aerial work platform
ZED 20.3 HV
9
COD. UM0284_GB | REV. 0.0 | ED: 09/17
Chapter 4
GB
CONTROLS
7
Power supply present;
•
The green light comes on to indicate that the power supply is on and
that it is possible to manoeuvre the platform.
8
Three-position spring-return to centre selector switch, powers the motor
on/off.
•
Keep the selector in the up position to start the motor.
•
Keep the selector in the down position to turn off the motor.
9
Emergency stop button.
•
pressing the emergency stop button disables all the controls and the
vehicle engine switches off.
4.7
Power take-off control
The power take-off control depends on the model of the vehicle.
On some vehicles, the power take-off is engaged electrically.
In this case, there is a control button on the dashboard and a relative indicator light.
Other vehicles have a mechanical power take-off that is engaged by using a manual control lever.
CAUTiOn
Depress the clutch before engaging or disengaging the power take-off.
never drive with the power take-off engaged, this could cause damage to the
gear and hydraulic pumps.
