8
Aerial work platform
ZED 20.3 HV
COD. UM0284_GB | REV. 0.0 | ED: 09/17
GB
Chapter 4
CONTROLS
4.6
Control panel in the work platform
9
8
7
5
4
3
2
1
6
Fig.
4.7
item
Description
1
Three-position spring-return to centre proportional lever, rotates the turret.
•
Keep the lever in the up position to rotate the platform to the right;
•
Keep the lever in the down position to rotate the platform to the left.
2
Three-position spring-return to centre proportional lever, raises/lowers the
telescopic boom.
•
Keep the lever in the up position to raise the telescopic boom.
•
Keep the lever in the down position to lower the telescopic boom.
3
Three-position spring-return to centre proportional lever, extends/retracts
the telescopic boom.
•
Keep the lever in the up position to extend the telescopic element.
•
Keep the lever in the down position to retract the telescopic boom.
4
Three-position spring-return to centre proportional lever, rotates the
basket.
•
Keep the lever in the up position to rotate the turret to the right.
•
Keep the lever in the down position to rotate the turret to the left
5
Three-position spring-return to centre proportional lever, raises/lowers the
articulated boom.
•
Keep the lever in the up position to raise the articulated boom.
•
Keep the lever in the down position to lower the articulated boom.
6
Overload
alarm;
•
The warning light comes on and an audible alarm sounds, which lasts
a few seconds, indicating that the machine is in a locked condition.
