background image

 

5.4.4.3. 

Periodical Sending 

You can setup to send an image file to FTP server periodically by selecting 

On 

to send the image file to FTP server triggered with setting period. 

 

Remote path

Type the remote path, up to 64 characters. 

Image file name

Type the file name of the image sent to FTP server with 

up to 10 alphanumeric characters, - (hyphen) and _ (under score). 

Suffix

Select a suffix to be added to the file name sent to FTP server. 

None

The name of the sent file will be the Image file name. 

Date & time

The date & time suffix is added to the Image file name. The 

date & time suffix consists of lower two-digits of year (2 digits), month (2 

digits), date (2 digits), hour (2 digits), minute (2 digits) and second (2 digits), 

and consecutive number (2 digits), thus 14-digit number is added to the file 

name. 

Sequence number

consecutive

 number is added to the Image file 

name. 

Sequence number clear

Click 

Clear 

and the suffix of the sequence 

number returns to 1. 

Interval

Set the interval to send the periodic image. Minimum value is 1 

minute and maximum value is 24 hours.   

Effective period

Set the period during which the periodical sending is 

effective.  

Always

The periodical sending is always effective. 

Schedule

You can specify the period when the periodical sending is 

effective in the schedule setting in the other section. Click 

Schedule 

and 

the setting menu for the effective period is displayed. 

65

 

Summary of Contents for IPCAM-8309F


















































































Reviews: