5.4.10.
Alarm Buffer
On this page you can set the Pre-alarm image (the image before the alarm
detection) and the Post - alarm image. These can be set when
Alarm sending
FTP client setting menu or Image memory setting menu is set to
On
, and also
when
Use alarm buffer
is selected.
Setting
Video Mode:
The video mode of alarm buffer is MPEG-4.
Alarm buffer
：
To activate the Alarm buffer function, select
On
. The basic setting
options are displayed below. When you do not use the Alarm output function, select
Off
.
Recording capacity
Pre-alarm period
：
Display the maximum recording capacity of image before the
alarm detection.
Post-alarm period
：
Display the maximum recording capacity of image after the
alarm detection.
Recording time
Set the recording time for the Pre-alarm image and Post alarm image.
Pre alarm period
：
Type it with recording time of the image before the alarm
detection.
Post alarm period
：
Type it with recording time of the image after the alarm
detection.
Note
：
• The value of Recording capacity differs depending on Image size, bit rate (for
MPEG4) and Image quality (for MPEG4 and MJPEG) in the camera setting
menu.
78
Summary of Contents for IPCAM-8309F
Page 1: ...IPCAM 8318P Dual Stream Network High speed Dome Camera 2 ...
Page 8: ...Product Specification 9 ...
Page 81: ......
