CTC Union IPCAM-8309F User Manual Download Page 2

Page: 2 / 81

LEGAL

The information in this publication has been carefully checked and is believed to be

entirely accurate at the time of publication. CTC Union Technologies assumes no

responsibility, however, for possible errors or omissions, or for any consequences

resulting from the use of the information contained herein. CTC Union Technologies

reserves the right to make changes in its products or product specifications with the

intent to improve function or design at any time and without notice and is not required to

update this documentation to reflect such changes.

CTC Union Technologies makes no warranty, representation, or guarantee regarding the

suitability of its products for any particular purpose, nor does CTC Union assume any

liability arising out of the application or use of any product and specifically disclaims any

and all liability, including without limitation any consequential or incidental damages.

CTC Union products are not designed, intended, or authorized for use in systems or

applications intended to support or sustain life, or for any other application in which the

failure of the product could create a situation where personal injury or death may occur.

Should the Buyer purchase or use a CTC Union product for any such unintended or

unauthorized application, the Buyer shall indemnify and hold CTC Union Technologies

and its officers, employees, subsidiaries, affiliates, and distributors harmless against all

claims, costs, damages, expenses, and reasonable attorney fees arising out of, either

directly or indirectly, any claim of personal injury or death that may be associated with

such unintended or unauthorized use, even if such claim alleges that CTC Union

Technologies was negligent regarding the design or manufacture of said product.

TRADEMARKS

Microsoft is a registered trademark of Microsoft Corp.

Please check CTC Union's website for any updated manual or contact us by E-mail at

[email protected]. Please address any comments for improving this manual or to point out

omissions or errors to [email protected]. Thank you.

CTC Union maintains a support web site (support.ctcu.com) where you may obtain the

latest manual, quick installation guide, and operational firmware. Membership to this web

site is free, however, you must be a registered member in order to access any software

updates.

CTC Union Technologies Co., Ltd.

Summary of Contents for IPCAM-8309F


















































































Search results

Summary of Contents for IPCAM-8309F

Reviews:

Related manuals for IPCAM-8309F

Brands by name

Popular brands

CTC Union IPCAM-8309F, User Manual

Search results

Summary of Contents for IPCAM-8309F

Reviews:

Related manuals for IPCAM-8309F

Brands by name

Popular brands