5.4.7.
Alarm Output
When you click
Alarm output
on the Advance mode menu, the Alarm output
setting menu appears. You can configure the alarm out of I/O port on the rear of
the device linked to the alarm detection and the timer.
Setting
Alarm output
：
To activate the Alarm output function, select
On
. The basic
setting options are displayed below. When you do not use the Alarm output
function, select
Off
.
Trigger condition
：
Select the mode of the Alarm output function. You can
choose “Alarm” or “Timer”.
Alarm:
Controls alarm output by synchronizing with an external sensor input or the
built-in activity detection function.
Motion Detection
：
Click
On
to use
Motion Detection
function as a sensor. You
can setup the motion detection function page.
Note
：
Motion Detection
works only when the Video mode is set to
MPEG4
and the
Cropping
is set to
Off
.
Use alarm buffer
：
Select
Use alarm buffer
when you forward the image of
before and after the alarm detection (pre-alarm, post-alarm). If you do not select
it, only the image of the moment of the alarm detection is forwarded. Click
Alarm
buffer
to display the Alarm buffer setting menu. For details, see “Setting the
Alarm Buffer — Alarm buffer setting" Menu page.
74
Summary of Contents for IPCAM-8309F
Page 1: ...IPCAM 8318P Dual Stream Network High speed Dome Camera 2 ...
Page 8: ...Product Specification 9 ...
Page 81: ......
