5.4.11.
Motion Detection
When you click
Motion Detection
on the Advance mode menu, the Motion
Detection setting menu appears. There are three Motion Detection functions which
act as sensors and can be set for different detecting zones. Each one has
Threshold and Sensitivity inputs which you can adjust to specific zone sequentially.
Motion Detection function can support triggering for FTP, SMTP and Alarm output
for capturing and sending images or starting alarm output.
If you do not wish to use the Motion Detection function, click it
Off
and press
OK
.
Motion Detection 1
：
Click
On
to use
Motion Detection 1
function as a sensor.
You can adjust and move the detecting zone by using mouse.
Motion Detection 2
：
Click
On
to use
Motion Detection 2
function as a sensor.
You can adjust and move the detecting zone by using mouse.
Motion Detection 3
：
Click
On
to use
Motion Detection 3
function as a sensor.
You can adjust and move the detecting zone by using mouse.
Threshold
：
You can use the tool bar to set up-limit value. When detecting zone
signals are over setting value, it would carry on assigned work.
Sensitivity
：
You can use the tool bar to set down-limit value. When detecting zone
signals are over setting value, it would carry on assigned work.
79
Summary of Contents for IPCAM-8309F
Page 1: ...IPCAM 8318P Dual Stream Network High speed Dome Camera 2 ...
Page 8: ...Product Specification 9 ...
Page 81: ......
