CTC Union ICR-W401, User Manual

Page: 125 / 147

125
CHAPTER 3.
WEB CONFIGURATIONS
3.11.1.2 SNMP v3 User configuration
For SNMP v3 User Configuration, you need to register authentication and allow a receiver that
confirm the packet was not modified in transit. There are three options to set up SNMP v3
Configuration.
Service > SNMP > SNMP v3 User configuration
Item Description
Mode
Select from Disable or Enable to configure SNMP.
The default is Disable.
Name Fill in your name.
Auth Mode Select from Authentication or Privacy.
Authentication Password Fill in your authentication password.
Authentication Protocol Select from MD5 or SHA.
Privacy Password Fill in your privacy password.
Privacy Protocol Select from DES or AES.
Access Select from Read-Only or Read-Write.