CTC Union ICR-W401, User Manual

Page: 70 / 147

70
CHAPTER 3.
WEB CONFIGURATIONS
3.8.2 IP Routing > RIP
This section allows you to configure RIP and select the mode from Disable or Enable. The default
is Disable.
Note:
RIP (Routing Information Protocol, RFC 2453) is an Interior Gateway Protocol (IGP) and is
commonly used in internal networks. It allows a router to exchange its routing information
automatically with other routers, and allows it to dynamically adjust its routing tables and adapt to
changes in the network.
IP Routing > RIP > General
Item Description
General
Mode Select from Off or On to open or close RIP function.
Redistribute local routes Select from Off or On to open or close redistribute local routes.
Redistribute connected
routes Select from Off or On to open or close redistribute connected
routes.
Redistribute OSPF routes Select from Off or On to open or close redistribute OSPF routes.
Redistribute BGP routes Select from Off or On to open or close redistribute BGP routes.