CTC Union ICR-W401 User Manual Download Page 40

Page: 40 / 147

CHAPTER 3.

WEB CONFIGURATIONS

3.4.2 WAN > Ethernet

3.4.2.1 WAN Ethernet Configuration

This section provides three options, including

DHCP Client

PPPoE Client

and

Static IPv4.

The

default is DHCP Client.

WAN > Ethernet

Item

Description

WAN Ethernet

There are three options to obtain the IP of WAN Ethernet.



DHCP Client:

DHCP server-assigned IP address, netmask, gateway,

and DNS.



PPPoE Client:

Your ISP will provide you with a username and

password. This option is typically used for DSL services.



Static IPv4:

User-defined IP address, netmask, and gateway address.

When selecting “

DHCP Client

” option, you can set up DNS Server Configuration.

For IPv4 DNS Server, users can set up three DNS servers. Each DNS server entry has provided
with “From ISP”, “User Defined” and “None” option to be selected from the drop-down menu.

Summary of Contents for ICR-W401




















































































































































Search results

Summary of Contents for ICR-W401

Reviews:

Related manuals for ICR-W401

Brands by name

Popular brands

CTC Union ICR-W401, User Manual

Search results

Summary of Contents for ICR-W401

Reviews:

Related manuals for ICR-W401

Brands by name

Popular brands