CTC Union ICR-W401, User Manual

Page: 32 / 147

32
CHAPTER 3.
WEB CONFIGURATIONS
3.3.4 System > Alarm
This section allows you to configure the alarm.
Note:
(1) If you select SMS in Alarm input/output, you need to add the trust phone number into
Contracts/ On Duty .
(2) If you select SNMP trap in Alarm output, you need to set up SNMP trap configuration from
Service SNMP.
(3) If you select E-Mail in Alarm output, you need to set up SMTP configuration from Service
SMTP.
(4) If you select TR069 in Alarm output, you need to set up TR069 configuration from Service
TR069.
System > Alarm
Item Description
Mode
Turn on/off the Alarm configuration. Select from Disable or Enable. The
default is Enable.
Alarm Input
Select items from Alarm Input (SMS, DI 1, DI 2, VPN disconnect, WAN
disconnect, LAN disconnect, Reboot) as input to trigger alarm.

SMS: It means on duty team members on Contacts / On Duty can send
SMS to the phone number of using SIM card to trigger alarm.

DI: IO to trigger alarm.

VPN disconnect: All tunnels get disconnected then trigger alarm.

WAN disconnect: WAN connections get disconnected then trigger alarm.

LAN disconnect: LAN connection get disconnected then trigger alarm.

Reboot: Reboot then trigger alarm.
Alarm Output Select from items from Alarm Output (SMS, DO, SNMP trap, E-mail, TR069)