Dual Band Wireless VoIP Gateway
User’s Manual
29
2-2-10 Line settings
General Settings
→
Line settings
Listening Volume:
Use the drop-down menu to adjust the hearing (listening) volume.
Speaking Volume:
Use the drop-down menu to adjust the speaking volume.
Tone Volume:
Use the drop-down menu to adjust the tone volume. It will apply to all tones generated by
the VoIP Gateway including Dial Tone, Ring Back Tone and Busy Tone.
FXS Current:
Set the output D.C. current of FXS port.
Flash Time:
Enter the minimum flash time for FXS detecting. When the flash signal generated by the
phone set is shorter than Min. FXS Hook Flash Time, FXS port will be on-hook.. Enter the maximum flash
time for FXS detecting. When the flash signal generated by the phone set is longer than the Flash Time,
FXS port will be on-hook.
Polarity Reversal:
Check the box to activate the generation of polarity reversal from FXS.
FXS Chip Option 1:
Check the box to avoid mis-detecting the loop state of a subscriber line or PBX user
loop from FXS interface. In some cases, the off-hook voltage might cause the FXS interface mis-detect the
idle and the active state, in order to avoid this situation, un-check this feature.
