78
Chapter 4
Web Configuration & Operation
General Settings
Enable Loop Protection:
Enable or disable loop protection function.
Transmission Time:
The interval between each loop protection PDU sent on each port. Valid values are 1 to 10 seconds.
Shutdown Time:
The period for which a port will be kept disabled. Valid values are 0 to 604800 seconds. 0 means that a
port is kept disabled until next device restart.
Port Configuration
Port:
List the number of each port. “All” settings apply to all ports.
Enable:
Enable or disable the selected ports’ loop protection function.
Action:
When a loop is detected on a port, the loop protection will immediately take appropriate actions. Actions will be
taken include “Shutdown Port”, “Shutdown Port and Log” or “Log Only”.
Shutdown Port:
A loop-detected port is shutdown for a period of time configured in “Shutdown Time”.
Shutdown Port and Log:
A loop-detected port is shutdown for a period of time configured in “Shutdown Time” and
the event is logged.
Log Only:
The event is logged and the port remains enable.
Tx Mode:
Enable or disable a port to actively generate loop protection PDUs or to passively look for looped PDUs.
4.8.2 Status
Port:
The port number.
Action:
Display the configured action that the switch will react when loops occur.
Transmit:
Display the configured transmit (Tx) mode.
Loops:
The number of loops detected on a port.
Status:
The current loop status detected on a port.
Loop:
Loops detected on a port or not.
Time of Last Loop:
The time of the last loop event detected.
Summary of Contents for GSW-3208M2
Page 1: ...1 GSW 3208M2 Managed Gigabit Ethernet Switch ...
Page 145: ......
