87
Chapter 4
Web Configuration & Operation
Mode:
Two MVR operation modes are provided.
Dynamic:
MVR allows dynamic MVR membership reports on source ports. (This is the default mode.)
Compatible:
MVR membership reports are forbidden on source ports.
Tagging:
Specify whether IGMP/MLD control frames will be sent tagged with MVR VID or untagged.
Priority:
Specify the priority for transmitting IGMP/MLD control frames. By default, priority is set to 0. Allowed priority
values is 0
~
7.
LLQI:
LLQI stands for Last Listener Query Interval and is to configure the maximum time to wait for IGMP/MLD report
memberships on a receiver port before removing the port from multicast group membership. By default, LLQI is set to 5
tenths of a second (0.5 second). The allowed range is 0
~
31744 tenths of a second.
Interface Channel Profile:
Click the “Save” button before editing its Interface Channel Profile. Once “Save” is clicked, you
are allowed to edit MVR channels of the selected IPMC profile settings by clicking the
button.
Port Role:
Click the Port Role symbol to change the role status.
Inactive (I):
By default, all ports are set to inactive. Inactive ports do not participate in MVR operations.
Source (S):
Set a port (uplink ports) to source port. Source ports will receive and send multicast data. Subscribers
can not directly be connected to source ports. Please also note that source ports cannot be management ports at
the same time.
Receiver (R):
Set a port to receiver port. Client or subscriber ports are configured to receiver ports so that they can
issue IGMP/MLD messages to receive multicast data.
Immediate Leave Setting
Port:
The port number.
Immediate Leave:
Enable for disable immediate leave function. When enabled, the device immediately removes a port
from a multicast stream as soon as it receives leave message for that group. This option only applies to an interface
configured as MVR receivers.
Click the “Add New MVR VLAN” button to insert a new entry to the list.
Click the “Delete” button to remove a newly-inserted entry or select the checkbox to remove a saved entry during the
next save.
Click the “Save” button to save settings or changes.
Click the “Reset” button to restore changed settings to the default settings.
MVR Channel Configuration
VLAN ID:
Display the selected entry’s multicast VLAN ID. This field is not editable.
Summary of Contents for GSW-3208M2
Page 1: ...1 GSW 3208M2 Managed Gigabit Ethernet Switch ...
Page 145: ......
