74
Chapter 4
Web Configuration & Operation
Round-Trip Time:
The time interval (measured in milliseconds) between the most recent Response and the Request that
matched it from the RADIUS accounting server. The granularity of this measurement is 100 ms. A value of 0 ms indicates
that there hasn't been round-trip communication with the server yet.
4.7 Aggregation
Compared with adding cost to install extra cables to increase the redundancy and link speed, link aggregation is a
relatively inexpensive way to set up a high-speed backbone network that transfers much more data than any one single
port or device can deliver. Link aggregation uses multiple ports in parallel to increase the link speed. And there are two
types of aggregation that are available, namely “Static” and “LACP”.
Under the Aggregation heading are two major icons, static and LACP.
4.7.1 Static
Aggregation Mode Configuration
Source MAC Address:
All traffic from the same Source MAC address is output on the same link in a trunk.
Destination MAC Address:
All traffic with the same Destination MAC address is output on the same link in a trunk.
IP Address:
All traffic with the same source and destination IP address is output on the same link in a trunk.
TCP/UDP Port Number:
All traffic with the same source and destination TCP/UDP port number is output on the same link
in a trunk.
Aggregation Group Configuration
Group ID:
Trunk ID number. “Normal” means that no aggregation is used. Five aggregation groups are available for use.
Each group contains at least 2 to 10 links (ports). Please note that each port can only be used once in Group ID 1
~
5.
Port Members:
Select ports to belong to a certain trunk.
Summary of Contents for GSW-3208M2
Page 1: ...1 GSW 3208M2 Managed Gigabit Ethernet Switch ...
Page 145: ......
