31
Chapter 4
Web Configuration & Operation
4.5.6 Ports QoS Statistics
This page provides statistics for the different queues for all switch ports.
Port:
The logical port for the settings contained in the same row.
Qn:
There are 8 QoS queues per port. Q0 is the lowest priority queue.
Rx/Tx:
The number of received and transmitted packets per queue.
4.5.7 Ports QCL Status
This page shows the QCL status by different QCL users.
Each row describes the QCE that is defined. It is a conflict if a specific QCE is not applied to the hardware due to hardware
limitations. The maximum number of QCEs is 256 on each switch.
User:
Indicates the QCL user.
QCE#:
Indicates the index of QCE.
Frame Type:
Indicates the type of frame to look for incoming frames. Possible frame types are:
Any:
The QCE will match all frame type.
Ethernet:
Only Ethernet frames (with Ether Type 0x600-0xFFFF) are allowed.
LLC:
Only (LLC) frames are allowed.
SNAP:
Only (SNAP) frames are allowed.
IPv4:
The QCE will match only IPV4 frames.
IPv6:
The QCE will match only IPV6 frames.
Port:
Indicates the list of ports configured with the QCE.
Action:
Indicates the classification action taken on ingress frame if parameters configured are matched with the frame's
content. There are three action fields: Class, DPL and DSCP.
Class:
Classified QoS class; if a frame matches the QCE it will be put in the queue.
DPL:
Drop Precedence Level; if a frame matches the QCE then DP level will set to value displayed under DPL column.
DSCP:
If a frame matches the QCE then DSCP will be classified with the value displayed under DSCP column.
Summary of Contents for GSW-3208M2
Page 1: ...1 GSW 3208M2 Managed Gigabit Ethernet Switch ...
Page 145: ......
