52
Chapter 4
Web Configuration & Operation
4.6.2.1.2 Switch Status
User Module Legend
User Module Name:
The full name of a module that may request Port Security services.
Abbr
: This column is the abbreviation for the user module used in the “Users” column in the “Port Status”.
Port Status
Port:
Port number. Click a particular port number to see its port status.
Users:
Each of the user modules has a column that shows whether that module has enabled Port Security or not. A '-'
means that the corresponding user module is not enabled, whereas a letter indicates that the user module abbreviated
by that letter has enabled port security.
State:
This shows the current status of a port. It can be one of the following states:
Disabled:
No user modules are currently using the Port Security service.
Ready:
The Port Security service is in use by at least one user module, and is awaiting frames from unknown MAC
addresses to arrive.
Limit Reached:
The Port Security service is enabled by at least the Limit Control user module, and that module has
indicated that the limit is reached and no more MAC addresses should be taken in.
Shutdown:
The Port Security service is enabled by at least the Limit Control user module and that module has
indicated that the limit is exceeded. No MAC addresses can be learned on the port until it is administratively re-
opened on the Limit Control configuration page.
MAC Count (Current/Limit):
The two columns indicate the number of currently learned MAC addresses (forwarding as
well as blocked) and the maximum number of MAC addresses that can be learned on the port, respectively. If no user
modules are enabled on the port, the Current column will show a dash (-). If the Limit Control user module is not enabled
on the port, the Limit column will show a dash (-).
Summary of Contents for GSW-3208M2
Page 1: ...1 GSW 3208M2 Managed Gigabit Ethernet Switch ...
Page 145: ......
