39
Chapter 4
Web Configuration & Operation
4.6.1.7 SNMP
4.6.1.7.1 System Configuration
Configure SNMP on this page.
SNMP System Configuration
Mode:
Indicates the SNMP mode operation. Possible modes are:
Enabled:
Enable SNMP mode operation.
Disabled:
Disable SNMP mode operation.
Version:
Indicates the SNMP supported version. Possible versions are:
SNMP v1:
Set SNMP supported version 1.
SNMP v2c:
Set SNMP supported version 2c.
SNMP v3:
Set SNMP supported version 3.
Read Community:
Indicates the community read access string to permit access to the SNMP agent. The allowed string
length is 0 to 255, and the allowed content is the ASCII characters from 0x21 to 0x7E.
Write Community:
Indicates the community write access string to permit access to the SNMP agent. The allowed string
length is 0 to 255, and the allowed content is the ASCII characters from 0x21 to 0x7E. These two fields are applicable only
for SNMP version v1 or v2c. If SNMP version is v3, the community string will be associated with SNMPv3 communities
table. SNMPv3 provides more flexibility to configure security name than a SNMPv1 or SNMPv2c community string. In
addition to community string, a particular range of source addresses can be used to restrict source subnet.
Engine ID:
Indicates the SNMPv3 engine ID. The string must contain an even number (in hexadecimal format) with
number of digits between 10 and 64, but all-zeros and all-'F's are not allowed. Changes to the Engine ID will clear all
original local users.
Summary of Contents for GSW-3208M2
Page 1: ...1 GSW 3208M2 Managed Gigabit Ethernet Switch ...
Page 145: ......
