CTC Union GSW-3208M1, User Manual

Page: 142 / 240

139
6.4 Management with Http Connection
Users can manage the switch with Http Web Browser connection. The
default IP setting is
192.168.1.1
and NetMask
255.255.255.0
. The default IP
Gateway is
192.168.1.254
. Before http connection, IP address configuration of
the switch could be changed first.
1 Please follow the instruction in Section 6.2 to complete the console
connection.
2
Login in with “
admin
” (password is also “
admin
” by default.)
3
Use “
show ip interface
” command to check IP address of the switch first.
4 If IP address needs to be changed, follow the steps ...
4.1
Enter “
config
” command, and the prompt will become “(config)#”.
4.2
Enter “
interface vlan 1
” command, and the prompt will become “(config-
if)#”.
4.3
Enter “
ip address xxx.xxx.xxx.xxx yyy.yyy.yyy.yyy
” command
(
xxx.xxx.xxx.xxx
is the IP address and
yyy.yyy.yyy.yyy
is the netmask)
to modify IP address of the switch.
4.4
Enter “
exit
” command to go back to “(config)#” prompt.
4.5
If IP Gateway will be set, enter “
ip default-gateway xxx.xxx.xxx.xxx
”
command to set the IP gateway of the switch. (
xxx.xxx.xxx.xxx
is the
IP address.)
4.6 Enter
“
exit
” command to go back to “#” prompt.
4.7
Enter “
show ip interface
” to check the IP settings.
After IP address configuration done and the switch is connected to network,
users can start Http connection by entering IP address of the switch to the web
address line in Web Browser. A login screen will be prompted for user name
and password. The default user name and password is "
admin
" / ”
admin
”.
Then the management homepage will appear.