Chapter 4. Web Configuration & Operation
62
CHAPTER 3
WEB OPERATION & CONFIGURATION
Action:
Display the forwarding action of the ACE.
Permit:
Frames matching the ACE may be forwarded and learned.
Deny:
Frames matching the ACE may be forwarded and learned.
Filtered:
Frames matching the ACE are filtered.
Rate Limiter:
Indicates the rate limiter number of the ACE. The allowed range is 1 to 16. When Disabled is displayed,
the rate limiter operation is disabled.
Port Redirect:
Indicates the port redirect operation of the ACE. Frames matching the ACE are redirected to the port
number. The allowed values are Disabled or a specific port number. When Disabled is displayed, the port redirect
operation is disabled.
Mirror:
Specify the mirror operation of this port. The allowed values are:
Enabled:
Frames received on the port are mirrored.
Disabled:
Frames received on the port are not mirrored. The default value is "Disabled".
CPU:
Forward packet that matched the specific ACE to CPU.
CPU Once:
Forward first packet that matched the specific ACE to CPU.
Counter:
The counter indicates the number of times the ACE was hit by a frame.
Conflict:
Indicate the hardware status of the specific ACE. The specific ACE is not applied to the hardware due to
hardware limitations.
3.4.5.4 DHCP
DHCP Snooping allows the switch to protect a network from attacking by other devices or rogue DHCP servers. When
DHCP Snooping is enabled on the switch, it can filter IP traffic on insecure (untrusted) ports that the source addresses
cannot be identified by DHCP Snooping. The addresses assigned to connected clients on insecure ports can be
carefully controlled by either using the dynamic binding registered with DHCP Snooping or using the static binding
configured with IP Source Guard.
Summary of Contents for FRM220-MSW404
Page 1: ...1 FRM220 MSW404 L2 OAM Managed Carrier Ethernet Switch ...
Page 179: ......
