manualshive.com logo in svg

CTC Union 6212576, Installation And Maintenance Manual

Share
Download
CTC Union 6212576 Installation And Maintenance Manual Download Page 39

39

 

CTC EcoLogic S

10.  Appendix

10.1 

Types of Operation with CTC EcoEl V2

This is a connection option where CTC EcoAir is connected to the CTC 

EcoEl V2 electric boiler.

10.1.1 

Installation

•  Turn off the power to the products.

•  Close shut-off valves underneath CTC EcoEl.

•  Disconnect the existing heat pump.

•  Position the new heat pump in place according to its Installation and 

Maintenance Manual.

•  Install the circulation pump and fit its supply cable and control cable to 

the heat pump according to the wiring diagram. The circulation pump 

is marked as G11 on wiring diagram.

•  Connect the heat pump power supply to its own group fuse, refer to 

the heat pump’s instructions.

•  Install the display unit according to its installation instructions.

•  Vent water pipes and open shut-off valves underneath CTC EcoEl.

•  Turn on the power to the products.

fr

om heat pump

to heat pump

Summary of Contents for 6212576













































Reviews:

No comments

Brands by name

Popular brands

Load more brands