CTC Union 6212576 Installation And Maintenance Manual Download Page 18

Page: 18 / 44

CTC EcoLogic S

3.3

Settings

3.3.1

Settings Heating Circuit

Menu: "Installer / Settings / Heating Circuit" when controlling

outdoor sensor

Example

Inclination 50 means that the temperature to the

external heating tank will be 50 °C when the outdoor

temperature is -15 °C if Adjustment is set to 0. If

Adjustment is set to +5 °C, the temperature will

be 55 °C instead. For all outdoor temperatures the

inclination is increased by 5 °C, i.e. inclination is parallel

displaced by 5 °C.

Menu: "Installer / Settings /".

3.3.1.1

Control on outdoor sensor/
inclination

EcoLogic S controls the charging of the external heating

tank based on the set heat curve. The inclination of

the heat curve indicates the temperature to which the

external heating tank must charge at different outdoor

temperatures.

The outdoor sensor used depends on the type of heat

pump connected to the system:

• Liquid/water heat pump (CTC EcoPart): -

packaged outdoor sensor must be installed

(refer to the "Electrical installation/Connecting the

control card EcoAir/EcoPart" chapter)

• Air/water heat pump (CTC EcoAir): -the existing

outdoor sensor of the heat pump is used.

Max primary fl ow °C

55 (30...80)

Maximum temperature (sensor HP

out

) permitted out to

the external heating tank.

Min primary fl ow °C

14 (14...65)

Minimum temperature (sensor HP

out

) permitted out to

the external heating tank.

Start/stop diff °C

5 (1...30)

This menu is used to set the negative hysteresis before

the heat pump starts charging the external heating

tank after the stop temperature (sensor HP

out

) has been

reached.

Example: If the stop temperature is 55 °C and hysteresis

is set to 5 °C in this menu, it means the heat pump will

start charging again when the temperature has dropped

to 50 °C.

Inclination °C

50 (25...85)

Inclination indicates the temperature the external heating

tank needs at different outdoor temperatures. More

information about this can be found in the "Your home’s

heating settings" chapter.

The value set in this menu is the outgoing fl ow

temperature to radiators when the outdoor temperature

is -15 °C.

Summary of Contents for 6212576













































Search results

Summary of Contents for 6212576

Reviews:

Brands by name

Popular brands

CTC Union 6212576, Installation And Maintenance Manual

Search results

Summary of Contents for 6212576

Reviews:

Brands by name

Popular brands